Zte ZXR10 5250 Series - Set Qos Priority-Mapping Port Trust-Mode

Chapter4ServiceConguration
ParameterDescription
ParameterDescription
<1-28>
Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the5250-28TCdeviceisusedasanexample.
<0-7>UPpriority.
Guidelines
UNTAGmessagesusetheports’defaultprioritiestoallocateUPprioritiesforthe
messages.
Example
ThefollowingexamplesetsthedefaultUPpriorityto2forport2:
zte(cfg)#setqospriority-mappingport2default-up2
4.14.2setqospriority-mappingporttrust-mode
Purpose
Thiscommandsetsaporttrustmode.
CommandMode
Globalcongurationmode
Syntax
setqospriority-mappingport<1-28>trust-mode{dscp-priority|port-profile|user-priority}
ParameterDescription
ParameterDescription
<1-28>
Portnumber.Differentdeviceshavedifferentportnumberranges.
Inthesyntax,the5250-28TCdeviceisusedasanexample.
dscp-priority
SelectsproleinaccordancewiththeDSCPeldofthemessage.
ThecorrespondingrelationbetweentheDSCPandproleis
decidedbytheqos-proleconguration.
port-profile
Fieldinuntrustedmessage.Proleisselectedinaccordancewith
ports.Thecorrespondingrelationbetweentheportandproleis
decidedbytheport-to-proleconguration.
user-priority
SelectsproleinaccordancewiththeUPeldofthemessage.
ThecorrespondingrelationbetweentheUPandproleisdecided
bytheqos-proleconguration.Theportdefaultconguration
istrustUP .
4-301
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential