Zte ZXR10 5250 Series - Set Anti-Dos; Show Qos Priority-Mapping Port

Chapter4ServiceConguration
Example
Thefollowingexamplesetstheegressshapinglimitto2Mbpsandburstsizeto32KBytes
forqueue2onport2/1:
zte(cfg)#setqostraffic-shapingxge-port2/1queue2data-rate2burst-size8
4.14.30setanti-dos
Purpose
Thiscommandenablesordisablestheanti-DOSfunction.
CommandMode
Globalcongurationmode
Syntax
setanti-DoS{enable|disable}
ParameterDescription
ParameterDescription
enableEnablestheanti-DOSfunction.
disableDisablestheanti-DOSfunction.
Guidelines
Whentheanti-dosfunctionisenabled,ltertheNullScan,SYNwithsport<1024,Xmascan,
SYSFINattackingmessages.
Default
Theanti-DOSfunctionisdisabled.
Example
Thefollowingexampleenablestheanti-DOSfunction:
zte(cfg)#setanti-dosenable
4.14.31showqospriority-mappingport
Purpose
Thiscommandshowstheprioritymappingcongurationbasedonport.
4-325
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential