Zte ZXR10 5250 Series - PVLAN Configuration; Set Vlan Pvlan Session

Chapter4ServiceConguration
CommandMode
Allcongurationmodes
Syntax
showqostraffic-limit[port<1-28>]protect
Parameters
ParameterDescription
<1-28>
Numberofaport.Differentdeviceshavedifferentportnumber
ranges.Inthesyntax,the5250-28TCdeviceisusedasan
example.
4.15PVLANConguration
4.15.1setvlanpvlansession
Purpose
ThiscommandsetsthePVLAN(privateVLAN)function.
CommandMode
Globalcongurationmode
Syntax
setvlanpvlansession<1-4>{promise-port<portlist>|promise-trunk<trunklist>}{isolate-p
ort<portlist>|isolate-trunk<trunklist>}{communi-port<portlist>|communi-trunk<trunkli
st>}
ParameterDescription
ParameterDescription
<1-4>PLVANsessionnumber
<trunklist>Trunkportlist
<portlist>Physicalportlist
Guidelines
Thepromiseportcaninterworkwithanytypeofports.Theisolateportcaninterworkwith
thepromiseportandordinaryports,butcannotinterworkwiththeisolateportorcommuni
port.Thecommuniportcaninterworkwiththepromiseport,thecommuniportinthesame
session,andordinaryports,butcannotinterworkwiththeisolateport.
4-353
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential