Zte ZXR10 5250 Series - Set Group Commander Ipport

ZXR105250SeriesCommandReference
Example
ThefollowingexampleshowsthedetailedinformationofthedevicewhoseMACaddress
is00.19.c6.32.f1.9c:
zte(cfg-group)#showztpmac00.19.c6.32.f1.9c
Device-Mac:00.19.c6.32.f1.9c
Device-Id:2
Device-Hop:2
Platform:ZXR105250-52TC
Hostname:zte
Version:ZTEZXR105250-52TCSoftware.
Versionnumber:V2.0.12.SV2.05.11B10
Versionmakedate:Apr272010May232013
Versionmaketime:14:57:5711:25:34
SwitchRole:CANDIDATE_SWITCH
IpAddress:
Peer-DeviceLocal-PortPeer-PortStatus
---------------------------------------------------
00.11.22.33.44.55Port33Port7Forward
5.6.20setgroupcommanderipport
Purpose
Thiscommandsetsaswitchasthecommander,speciesalayer-3portforcluster
management,andsetsanIPaddresspoolforclustermembers.
CommandMode
Clustermanagementcongurationmode
Syntax
setgroupcommanderipport<0-63>[ip-pool<A.B.C.D/M>]
ParameterDescription
ParameterDescription
<0-63>Numberofthelayer-3port
ip-pool<A.B.C.D/M>
IPaddresspoolusedtoallocateIPaddressesforcluster
members.
Guidelines
Ifthiscommandisrunonaswitch,theswitchisthecommander.Todeleteacommander,
runtheindependentorcandidatecommand.
5-50
SJ-20131111172707-003|2013-11-27(R1.0)ZTEProprietaryandCondential