Zte ZXR10 5900E Series - Configuring LLDP

ZXR105900ESeriesCongurationGuide(IPv4Routing)
StepCommandFunction
1ZXR10(config)#routerisisEntersIS-ISconguration
mode.
2ZXR10(config-isis-0)#interface<interface-name>EntersIS-ISinterface
congurationmode.
ZXR10(config-isis-0-if-vlan100)#circuit-type
{level-1|level-1-2|level-2-only}
Conguresaninterface
operationtype.
Default:level-1-2.
Thecongurationmustbe
consistentwiththeIS-ISglobal
operationtype.Inaddition,the
operationtypesofthedirectly
connectedneighborsmustalso
beconsistentwiththeoperation
type.
ZXR10(config-isis-0-if-vlan100)#hello-interval
<interval>[level-1|level-2]
Interval(second)forsending
Hellopackets.Range:
1-65535,default,10.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#hello-multiplier
<multiplier>[level-1|level-2]
Conguresthetimesof
thedurationforkeeping
neighborhoodthantheinterval
forsendingHellopackets.
Range:3-1000,default:3.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#lsp-interval
<interval>[level-1|level-2]
Congurestheinterval
(second)fortransmittingLSPs.
Range:1-65535,default:2.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#retransmit-interval
<interval>[level-1|level-2]
Congurestheinterval
(second)forretransmitting
LSPs.Range:1-65535,
default:2.
3
4-16
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential