Zte ZXR10 5900E Series - LLDP Configuration Example

Chapter4IS-ISConguration
StepCommandFunction
Thecongurationonlyapplies
topoint-to-pointlinks.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#priority
<priority>[level-1|level-2]
CongurestheDISelection
priorityforaninterface.Range:
0-127,default:64.Therouter
withahigherpriorityiselected
tobetheDIS.
Thecongurationisonly
effectiveforbroadcastlinks.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#metric
<metric-value>[level-1|level-2]
Setsthemetricvalueofan
IS-ISinterface.Inwidemode,
range:1-16777215,default:
10.Innarrowmode,range:
1-63.
Themetricvalueisusedwhen
theinterfaceparticipatesinthe
calculationoftheshortestIS-IS
path.
Ifoptionalparametersare
notset,thecongurationis
effectiveforbothlevel-1and
level-2operationtypes.
ZXR10(config-isis-0-if-vlan100)#network
point-to-point
Congurestheinterfaceon
whichtheIS-ISprotocol
isenabledtosimulatea
point-to-pointinterface.
ZXR10(config-isis-0-if-vlan100)#bfd-enableEnablestheBFDfunctionfor
theIS-ISprotocol.
ZXR10(config-isis-0-if-vlan100)#max-burst
<number>
Setsthemaximumnumberof
LSPsthatcanbesenteach
time.Range:1-50.
4-17
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential