Zte ZXR10 5900E Series - Figure 5-22 BGP and VRRP Linkage Configuration Example

ZXR105900ESeriesCongurationGuide(IPv4Routing)
Figure5-22BGPandVRRPLinkageCongurationExample
CongurationFlow
1.EstablishBGPrelationsbetweenS1andS3,andbetweenS2andS3.
2.CheckactiveandstandbyroutersstatuswhenS1andS2operateasVRRPs.
3.CongureatracksamgrobjectinBGPmode.
Note:
ForhowtoestablishBGPneighborrelationsbetweenS1andS3,andbetweenS2and
S3,refertotheBGPCongurationExample.
ForhowtocheckactiveandstandbyroutersstatuswhenS1andS2operateas
VRRPs,refertotheVRRPConfgurationsectionintheZXR108900E(V3.01.01)
SeriesCoreSwitchCongurationGuideCongurationGuide(Reliability).
CongurationCommands
RunthefollowingcommandsonS1
S1(config)#interfacegei-0/1/1/1
S1(config-if-gei-0/1/1/1)#noshutdown
S1(config-if-gei-0/1/1/1)#ipaddress13.13.13.1255.255.255.0
/*ConfiguretheVRRPinterfacesinVRRPmode.
ThevirtualVRRPaddressis13.13.13.66*/
S1(config-if-gei-0/1/1/1)#exit
S1(config)#vrrp
S1(config-vrrp)#interfacegei-0/1/1/1
S1(config-vrrp-if-gei-0/1/1/1)#vrrp66ipv413.13.13.66
5-76
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential