Zte ZXR10 5900E Series - Page 66

ZXR105900ESeriesCongurationGuide(IPv4Routing)
StepCommandFunction
2ZXR10(config-ospfv2)#area<area-id>virtual-link
<router-id>[hello-interval<seconds>][retransmit-interval
<seconds>][transmit-delay<seconds>][dead-interval<sec
onds>][authentication-key<key>][message-digest-key
<keyid>md5<cryptkey>[delay<time>]][authentication
[null|message-digest]]
DenesanOSPFvirtuallink.
Ifthedesignatedareadoes
notexist,anareaiscreated
automatically.
Usethenoformatofcommand
todeleteadesignatedvirtual
link.
Virtuallinkscannotbecreated
inarea0,stubareas,andNSSA
areas.
ForadescriptionoftheparametersinStep2,refertothefollowingtable:
ParameterDescription
<area-id>IDoftheareathroughwhichthevirtuallinktransits.Thearea
cannotbeastubarea,anNSSAarea,orarea0.
<router-id>IDofthepeerrouterconnectedwiththevirtuallink.
hello-interval<seconds>Interval(second)forsendingHELLOpacketsonthevirtual
link.Range:1-8192,default:10.
retransmit-interval<seconds>Retransmissioninterval(second)onthevirtuallink.Range:
1-8192,default:5.
transmit-delay<seconds>Timedelay(section)fortransmittingalinkstateupdate
packetonthevirtuallink.Range:1-8192,default:1.
dead-interval<seconds>Duration(second)forconsideringaneighborroutertobe
dead.Range:1-8192,default:40.
CongurationExample
EstablishavirtuallinkbetweentheinterconnectedinterfacesofS2andS3,seeFigure
3-11.
RouterIDsarelistedbelow.
DeviceRouterID
S11.1.1.2
S21.1.1.3
S31.1.1.4
3-34
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential