Zte ZXR10 5900E Series - Maintaining the OSPF Protocol

ZXR105900ESeriesCongurationGuide(IPv4Routing)
StepCommandFunction
2ZXR10(config-ospf-process-id)#nsfRunsthensfcommandonthe
helpparty.
WhentheOSPFGRisenabled,
therearetworoles:therestart
partyandthehelpparty.The
restartpartyrestartsarouter
andthehelppartyhelpsto
completetheGRoperation.
3ZXR10(config-ospf-process-id)#grace-period<time>(Optional)Conguresthe
durationfortheOSPFGR.By
default,itissetto120seconds.
Iftherearetoomanyroute
entriestobeswitched,youcan
prolongthisduration.
4ZXR10(config-ospf-process-id)#interface
<interface-name>
EntersOSPFinterface
congurationmode.
5ZXR10(config-ospf-process-id-if-interface-
name)#dead-interval<time>
(Optional)Thiscommandis
usedwhentherackswitching
operationtakestoolong.
3.3MaintainingtheOSPFProtocol
TomaintaintheOSPFprotocolontheZXR105900E,runthefollowingcommands:
CommandFunction
ZXR10#showipospf[<process-id>]Displaysthesummaryinformation
abouttheOSPFprotocolandeach
OSPFarea.
ZXR10#showipospfinterface[<interface-name>][process
<process-id>]
Displaystheinformationaboutan
OSPFinterface.
ZXR10#showipospfdatabase[database-summary|adv-router
<router-id>|self-originate][area<area-id>][process<process-id>]
Displaystheinformationaboutan
OSPFlinkstatedatabase.
ZXR10#showipospfdatabaserouter[<link-state-id>][adv-router
<router-id>|self-originate][area<area-id>][process<process-id>]
Displaystheinformationabout
routerLSAsinanOSPFlinkstate
database.
ZXR10#showipospfdatabasenetwork[<link-state-id>][adv-router
<router-id>|self-originate][area<area-id>][process<process-id>]
Displaystheinformationabout
networkLSAsinanOSPFlink
statedatabase.
3-38
SJ-20150114102049-003|2015-01-15(R1.0)ZTEProprietaryandCondential