Zte ZXR10 8900 Series - Configuring HQoS

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
ipdhcpsnoopinginformationformat
ipdhcpsnoopinginformationpolicy
ipdhcpsnoopingvlan
ipdhcpsnoopinginformation
circuit-id
Purpose
UsethiscommandtoconguresuboptionofDHCPOPT82circuit-id
basedonLayer2VLANorphysicalinterface.Usenocommandto
deletetheconguration.
CommandModes
PhysicalinterfacecongurationorLayer2VLANconguration
Syntax
ipdhcpsnoopinginformationcircuit-id<circuit-idstring>
noipdhcpsnoopinginformationcircuit-id
Syntax
Description
<circuit-idstring>
Thestringofoption82circuit-idcongured
bytheuser
Defaults
Null,thatis,thesuboptionofDHCPOPT82circuit-idisnotcon-
gured.
Instructions
Itisonlyappliedtoswitches.
Example
ThisexampleshowshowtoconguresuboptionsofDHCPsnoop-
ingOption82circuit-id.
ZXR10(confi-vlan)#ipdhcpsnoopinginformation
circuit-id“zxr10:vlan100:gei_1/1”
Related
Commands
showipsnoopinginformationvlan
showipdhcpsnoopinginformationinterface
ipdhcpsnoopinginformation
format
Purpose
Usethiscommandtosettheformatofthe82optioninsertedinto
theforwardedDHCPpacket:CHINA-TEL,DSL-FORUManduser
conguration.Bydefault,theCHINA-TELformatisadopted.Re-
storedefaultwiththenocommand.
CommandModes
Globalconguration
Syntax
ipdhcpsnoopinginformationformat{china-tel|dsl-forum
|user-configuration}
noipdhcpsnoopinginformationformat
98CondentialandProprietaryInformationofZTECORPORATION