Zte ZXR10 8900 Series - SysLog Configuration

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
ipdhcppolicy
Purpose
Usethiscommandtoenterpolicycongurationmodefromglobal
congurationmode.Deletethecongurationwiththenocom-
mand.
CommandModes
Globalconguration
Syntax
ipdhcppolicy<policy_name><priority>
noipdhcppolicy<policy_name><priority>
Syntax
Description
<policy_name>Policyname,with1~16characters.
<priority>Priority
Instructions
ItistherequiredcongurationofDHCPfunctionanditcanbe
usedtoconguredifferentprioritiesforthepolicieswiththesame
name.
UserscancontrolandconguretheaccesspolicyofDHCPusers
withDHCPpolicy.Thisimprovestheaccesscontrolandservice
expansibility.
DHCPpolicyisrelatedtointerfaces.Ifmultiplepoliciesthatare
relateddifferentinterfacesarecreatedinthesameDHCPpolicy,
andtheDHCPpolicyisboundtodifferentinterfaces,theaddress
assignmentsmayfail.
Example
Thisexampleshowshowtoenterthecongurationmodeofthe
policynamedpolicy1withpriority2.
ZXR10(config)#ipdhcppolicypolicy12
ZXR10(config-dhcp-policy)#
Related
Commands
showipdhcppolicy
ipdhcppolicy
Purpose
Usethiscommandtobindapolicytoaninterface.Deletethe
congurationwithnocommand.
CommandModes
Interfaceconguration
Syntax
ipdhcppolicy<policy_name>
noipdhcppolicy
Syntax
Description
<policy_name>Policyname
Instructions
Theplatformversion4.8.02andupgradeversionssupportthis
command.ItistherequiredcongurationofDHCPfunction.Bind
thedhcppolicytolayer-3interfaceinordertocontroltheaccess
users.
TheDHCPpoolintheDHCPpolicythatisboundtoaninterface
shouldbethevalidcongurationoftheinterface.Ifwronglybind
126CondentialandProprietaryInformationofZTECORPORATION