Zte ZXR10 8900 Series - Vrrp Advertise

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
<group_no>
Automaticdetectionnumber
line-protocol
interface
Statusofthetrackedinterface
Instructions
�Trackisusedtotracktheup/downstatus,BFDlinkstatusand
PINGdetectionstatusoftheinterface.Whenthestatusofthe
interfacechanges,relatedmoduleistriggeredtoprocessthe
change.
�Theplatformversion4.6.03andupgradeversionssupportthis
command.
Example
Thisexampledescribeshowtotrackthestatusofthefei_1/1in-
terface.
ZZXR10#conft
ZXR10(config)#track1interfacefei_1/1
ZXR10(config-if)#
Related
Commands
showtrack
vrrpadvertise
Purpose
UsethiscommandtosetthetimeintervalforsendingVRRPadver-
tisementontheinterface.Restorethedefaultwiththenocom-
mand.
CommandModes
Interfaceconguration
Syntax
vrrp<group>advertise[msec]<interval>
novrrp<group>advertise
Syntax
Description
<group>
VirtualrouterID,0~255.
msec
Changetheunitofthetimefromsecondinto
minute
<interval>
IntervalforthemastertosendVRRP
advertisements.Intheunitofsecond,1~
255;intheunitofmilliseconds,100~25000.
1secondbydefault
Instructions
VRRPenablesadvertisementintervaloflessthanonesecond.
However ,inencapsulatingpackets,theadvertisementtimeshall
beonesecond.Inthisway,thetimelearnedbytheotherendwill
stillonesecond,andthecongurationoflessthanonesecond
willnotbelearned.
Example
Thisexampledescribeshowtocongurethetimeintervalforsend-
ingVRRPadvertisementontheinterfaceas2seconds.
ZXR10(config)#interfacevlan1
ZXR10(config-if)#vrrp1advertise2
132CondentialandProprietaryInformationofZTECORPORATION