Zte ZXR10 8900 Series - Command Modes

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
channel-group
Function
Usethiscommandtocongurethechannelnumberandtimeslot
ofE1interface.Deletethechannelwiththenocommand.
CommandMode
Channelizationcongurationmode
Format
channel-group<channel-number>timeslots<timeslots>
nochannel-group<channel-number>
Parameter
Description
TheparameterdescriptionofE1interface:
<channel-number>
Channelnumber ,inrangeof1~31
<timeslots>
Timeslotnumber ,inrangeof1~31
TheparameterdescriptionofT1interface:
<channel-number>
Channelnumber ,inrangeof1~24
<timeslots>
Timeslotnumber ,inrangeof1~24
Instruction
ThecommandmustbeconguredbeforethechannelizedE1in-
terfacetakeseffect.Theconguredtimeslotshouldbeconsistent
withthetimeslotconguredatthepeerend.
Example
1.Thisexampledescribeshowtocongurethechannelnumber
ofE1interfaceas1andtimeslotnumberas1~10.
ZXR10(config)#controllerce1_3/1
ZXR10(config-control)#channel-group1timeslots1-10
ZXR10(config-control)#nochannel-group1
2.Thisexampledescribeshowtocongurethechannelnumber
ofT1interfaceas1andtimeslotnumberas1~10.
ZXR10(config)#controllerct1_3/1
ZXR10(config-control)#channel-group1timeslots1-10
ZXR10(config-control)#nochannel-group1
channelized
Purpose
UsethiscommandtosetwhetherCE3interfaceworksinchannel-
izationmode.
CommandModes
Channelizationconguration
Syntax
channelized
nochannelized
Instructions
ItisappliedtoZXR10GERandZXR10T64E/T128.
Example
ThisexampledescribeshowtosetCE3interfacetoworkinnon-
channelizationmode.
ZXR10(config)#controllerce3_1/1
ZXR10(config-control)#nochannelized
14CondentialandProprietaryInformationofZTECORPORATION