Zte ZXR10 8900 Series - Chapter 3 System Management; File System Management

Chapter2InterfaceConguration
dteenable
Purpose
Usethiscommandtosettheworkingmodeofsynchronousserial
porttoDTE.
CommandModes
Interfaceconguration
Syntax
dteenable
Defaults
DTEworkingmode
Instructions
ItisonlyappliedtoZXR10GAR,ZXRZSR.
Example
Thisexampledescribeshowtosettheworkingmodeofserialport
serial_1/1toDTE.
ZXR10(config)#interfaceserial_1/1
ZXR10(config-if)#dteenable
duplex
Purpose
Usethiscommandtoconguretheworkingmodeofthe100M
interfaceasthehalfduplexmodeandfullduplexmode.Restore
defaultwiththenocommand.
CommandModes
Interfaceconguration
Syntax
duplex{half|full}
noduplex
Syntax
Description
halfCongurestheworkingmodeof100Mport
ashalfduplexmode
fullCongurestheworkingmodeof100Mport
asfullduplexmode
Defaults
Fullduplexmode
Instructions
FastEthernetelectricalinterfaceandgigabitEthernetelectricalin-
terfacesupportsbothhalfandfullduplexmodes.ThefastEther-
netopticalinterface,gigabitEthernetelectricalinterfaceand10G
Ethernetinterfacesupportthefullduplexmodeonly.
Example
Thisexampledescribeshowtoconguretheinterfacefei_1/1as
thefull-duplexmode.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#duplexfull
CondentialandProprietaryInformationofZTECORPORATION19