Zte ZXR10 8900 Series - File Backup and Restoration

Chapter2InterfaceConguration
Instructions
DefaultPOS/ATMSDHis0x01,SONETis0xccandthiscommand
isusedforPOSinterfaceandATMinterface.
Example
ThisexampleshowshowtosetPOSportsectiontracesigneld
J0.
ZXR10(config)#intpos48_1/1
ZXR10(config-if)#flag?
c2Pathoverheadbyte
j0Sectiontracebyte
s1s0SpecifybitS1andS0ofH1
ZXR10(config-if)#flagj0?<0-255>Bytevalue
ZXR10(config-if)#flagj02
flags1s0
Purpose
UsethiscommandtosetPOSportandATMportsectiontracesign
eldS1.Restorethesystemdefaultconguration(0x24)ofPOS
portsynchronizationstateeldS1.
CommandModes
Interfaceconguration
Syntax
flags1s0<value>
noposflags1s0<value>
Syntax
Description
<value>
intherangeof0~3
Defaults
DefaultPOS/ATMare2.
Instructions
ThiscommandisusedforPOSinterfaceandATMinterface.
Example
ThisexampleshowshowtosetPOSportsectiontracesigneld
S1.
ZXR10(config)#intpos48_1/1
ZXR10(config-if)#flag?
c2Pathoverheadbyte
j0Sectiontracebyte
s1s0SpecifybitS1andS0ofH1
ZXR10(config-if)#flags1s03
flowcontrol
Purpose
UsethiscommandtocongureowcontrolonanEthernetport.
Restoredefaultwiththenocommand.
CommandModes
Interfaceconguration
Syntax
flowcontrol{enable|disable}
noflowcontrol
CondentialandProprietaryInformationofZTECORPORATION25