Zte ZXR10 8900 Series - Configuring CLI Privilege Classification

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
Syntax
Forethernetinterface,POSinterface,CPOS48interface,ce1inter-
faceandSmartGroupinterfaceonT128rack:mtu<128-1600>
ForCP3interfaceandmpppinterfaceonT128rack:mtu<128-1
600>
Forethernetinterface,POSinterface,CPOS48interface,ce1inter-
faceandSmartGroupinterfaceonT600rack:mtu<128-7680>
ForCP3interfaceandmpppinterfaceonT600rack:mtu<128-5
120>
Syntax
Description
<128-1600>
ThevalueofMTU
<128-7680>
ThevalueofMTU
<128-5120>
ThevalueofMTU
Defaults
�ForPOS/CPOS(CP3andCP48)interface,themtuis4470.
�ForEthernetinterface,themtuis1600.
Example
ThisexampleshowshowtosettheMTUofaseralinterfacefei_3/1
to168.
ZXR10(config-if)#mtu168
ZXR10(config-if)#showruninterfacefei_3/1
Buildingconfiguration...
!
interfacefei_3/1
physical-layermodenpct
mtu168
!
end
multicast-limit
Purpose
Usethiscommandtosetthelimitrate(inpercent)tomulticast
packetsontheEthernetport.Restorethedefaultwiththeno
command.
CommandModes
Interfaceconguration
Syntax
multicast-limit<percent-value>
nomulticast-limit
Syntax
Description
<percent-value>Limitratetomulticastpackets,ranging
1–100,100bydefault.
Instructions
nomulticast-limitandmulticast-limit100havethesame
function.
Example
Thisexampledescribeshowtosettheratelimit(inpercent)to
multicastpacketsonportfei_1/1to10.
ZXR10(config)#interfacefei_1/1
ZXR10(config-if)#multicast-limit10
40CondentialandProprietaryInformationofZTECORPORATION