Zte ZXR10 8900 Series - Negotiation Auto; Npc-Type; Parity

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
negotiationauto
Purpose
Usethiscommandtoactivateauto-negotiationoftheEthernetin-
terface.Disableauto-negotiationoftheEthernetinterfacewith
thenocommand.
CommandModes
Interfaceconguration
Syntax
negotiationauto[speed{10|100}]
nonegotiationauto
Syntax
Description
10
Setstheinterfacenegotiationautoto10M
100
Setstheinterfacenegotiationautoto100M
Defaults
Auto-negotiationisenabled.
Example
Thisexampledescribeshowtoenableauto-negotiationoninter-
facegei_2/1.
ZXR10(config)#interfacegei_2/1
ZXR10(config-if)#negotiationauto
npc-type
Purpose
UsethiscommandtosetthetypeofthecurrentNPCboard.
CommandModes
Interfaceconguration
Syntax
npc-type{npci|npct}
Syntax
Description
npci
SetstheNPCboardofthecurrentinterface
tonpci.
npct
SetstheNPCboardofthecurrentinterface
tonpct.
Instructions
�Theplatformversion4.6.02andupgradeversionssupportthis
command.
�ThecommandisappliedonlytoZXR10T128.Actually,cong-
urationwiththiscommandisunnecessary,fortheT128project
ensuresthecorrectnessofcongurationrestoration(readfrom
thedatabase)afteradifferentNPCinterfaceboardisreplaced
intheslot.
parity
Purpose
Usethiscommandtosettheparitychecktypeoftheasynchronous
serialport.
42CondentialandProprietaryInformationofZTECORPORATION