Zte ZXR10 8900 Series - Set Interface Recover; Set Interface Speed

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
Related
Commands
negotiationauto
setinterfacerecover
Purpose
Usethiscommandtocancelthelinkup/linkdownalarmandthe
SNMPTRAPinformationoftheshieldingethernetinterfaceinbatch
scale.
CommandModes
Globalconguration
Syntax
setinterfacerecover<up-down-type><port-list>
Syntax
Description
<up-down-type>Thevalueisdown-alarmorup-alarm.
down-alarm:cancelshieldingthelinkdown
alarmandSNMPTRAPinformation
up-alarm:cancelshieldingthelinkupalarm
andSNMPTRAPinformation.
<port-list>
Speciestheportlisttocongureinbatch
scale.
Example
ThisexampleshowshowtocancelthelinkupalarmandtheSNMP
TRAPinformationoftheshieldinginterfacefei_1/1,fei_1/2and
fei_1/3.
ZXR10(config)#setinterfacerecoverup-alarmfei_1/1-3
Related
Commands
recover
setinterfacespeed
Purpose
UsethiscommandtosetthespeedofEthernetportsinbatch.
CommandModes
Globalconguration
Syntax
setinterfacespeed<speed-value><port-list>
Syntax
Description
<speed-value>
Speedoftheports,10Mbps,100Mbpsor
1000Mbps
<port-list>
Portlistofthebatchconguration
Defaults
100MbpsforfastEthernetelectricalinterfaces,and1000Mbps
forGigabyteEthernetelectricalinterfaces.
Instructions
ThespeedoffastEthernetopticalinterfaces,GigabyteEthernet
opticalinterfacesand10GigabyteEthernetinterfacescannotbe
congured.
Example
Thisexampledescribeshowtosetthespeedofportsfei_1/1,
fei_1/2andfei_1/3to100Mbps.
ZXR10(config)#setinterfacespeed100fei_1/1-3
50CondentialandProprietaryInformationofZTECORPORATION