Zte ZXR10 8900 Series - Suspend-Card; Switch-Attribute

Chapter2InterfaceConguration
�Thisexampleshowshowtocreateacp48subinterfacethat
takesup1-16channels.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsonet
ZXR10(config-control)#sts-31-16
suspend-card
Purpose
Usethiscommandtosuspendtheinterfaceboardinthesystem
beforeunpluggingit.
CommandModes
PrivilegedEXEC
Syntax
suspend-card<board-name>
Syntax
Description
<board-name>
Nameoftheboardtobeunplugged
Instructions
ItisappliedonlytoZXR10GER.
Example
Thisexampledescribeshowtosuspendinterfaceboardfei_3in
thesystem.
ZXR10#suspend-cardfei_3
switch-attribute
Purpose
UsethiscommandtosettheattributesofLayer2andLayer3on
megabitinterfaces,gigabitinterfacesandSmartgroupinterfaces.
CommandModes
Interfaceconguration
Syntax
switch-attribute{enable|disable}
Syntax
Description
enable
ConguringLayer2Ethernetinterface
attributes
disable
ConguringLayer3Ethernetinterface
attributes
Defaults
Forrouters,defaultvalueisdisable.Forswitches,defaultvalue
isenable.
Example
ThisexampleshowshowtocongureLayer2attributeforinter-
facefei_6/1.
ZXR10(config)#interfacefei_6/1
ZXR10(config-if)#switch-attributeenable
CondentialandProprietaryInformationofZTECORPORATION65