Zte ZXR10 8900 Series - DHCP Snooping Overview; Configuring DHCP

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
tug-2e1clocksource
Purpose
UsethiscommandtosettheclocksourceoftheE1channelwhen
theCPOS3interfaceissettotheSDHmode,andtheAUGisinthe
AU-4mappingmode.Restorethedefaultwiththenocommand.
CommandModes
Channelizationconguration
Syntax
tug-2<tug-2-number>e1<line>clocksource{internal|
line}
notug-2<tug-2-number>e1<line>clocksource
Syntax
Description
tug-2<tug-2-numb
er>
tug-2number ,ranging1–7
e1<line>E1number ,ranging1–3
internal
Setstheinternalclockastheclocksourceof
theE1channel.
line
Setsthelineclockastheclocksourceofthe
E1channel.
Defaults
Internalmeanstheinternalclockbydefault.
Instructions
ItisappliedonlytoZXR10GER.
Example
Thisexampledescribeshowtosetthelineclockastheclocksource
oftheE1channel.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#augmappingau-4
ZXR10(config-control)#au-41tug-31
ZXR10(config-control)#tug-21e11clocksourceline
tug-2e1framing
Purpose
UsethiscommandtosetwhethertheE1channelworksinthe
framemodeandwhattheframeformatiswhentheCPOS3inter-
faceissettotheSDHmodeandtheAUGisintheAU-4mapping
mode.
CommandModes
Channelconguration
Syntax
tug-2<tug-2-number>e1<line>framing{unframe|frame|
crc4|no-crc4}
Syntax
Description
tug-2<tug-2-numb
er>
tug-2number ,ranging1–7
e1<line>E1number ,ranging1–3
framingSetstheE1channeltoworkintheunframe
mode.
68CondentialandProprietaryInformationofZTECORPORATION