Zte ZXR10 8900 Series - DHCP Configuration Examples

ZXR108900SeriesCommandReference(BasicCongurationVolumeII)
tug-2t1clocksource
Purpose
UsethiscommandtosettheclocksourceoftheT1channelwhen
theCPOS3interfaceissettotheSDHmode,andtheAUGisinthe
AU-3mappingmode.Restorethedefaultwiththenocommand.
CommandModes
Channelconguration
Syntax
tug-2<tug-2-number>t1<line>clocksource{internal|line}
notug-2<tug-2-number>t1<line>clocksource
Syntax
Description
tug-2<tug-2-numb
er>
tug-2number ,ranging1–7
t1<line>T1number ,ranging1–4
internal
Setstheinternalclockastheclocksourceof
theT1channel.
<line>
Setsthelineclockastheclocksourceofthe
T1channel.
Defaults
Internalmeanstheinternalclockbydefault.
Instructions
ItisappliedonlytoZXR10GER.
Example
ThisexampledescribeshowtosettheclocksourceoftheT1chan-
neltotheclocksource.
ZXR10(config)#controllercpos3_3/1
ZXR10(config-control)#framingsdh
ZXR10(config-control)#augmappingau-3
ZXR10(config-control)#tug-21t11clocksourceline
tug-2t1framing
Purpose
UsethiscommandtosetwhethertheT1channelshallworkinthe
framemodeandwhattheframeformatiswhentheCPOS3inter-
faceissettotheSDHmodeandtheAUGisintheAU-3mapping
mode.
CommandModes
Channelizationconguration
Syntax
tug-2<tug-2-number>t1<line>framing{unframe|frame|
esf|sf}
Syntax
Description
tug-2<tug-2-numb
er>
tug-2number ,ranging1–7
t1<line>T1number ,ranging1–4
unframeSetstheT1channeltoworkintheunframe
mode.
frameSetstheT1channeltoworkintheframe
mode.
70CondentialandProprietaryInformationofZTECORPORATION