Zte ZXR10 8900 Series - Chapter 9 ACL Configuration; ACL Overview

Chapter3DHCPandDHCPSNOOPINGConguration
Thelayer-3interfacetypeonswitchesthatthiscommandsupports
is:vlan,supervlan.
Example
Thisexampleshowshowtoenablethedhcpclientmoduleonthe
interface.
ZXR10(config-if)#ipaddressdhcpclient-idvlan1hostnamezxr10@zte.com
ZXR10(config-if)#
RelatedCommand
ipaddress
ipdhcpclientbroadcast-flag
Purpose
Usethiscommandtosetthedhcpclientbroadcast-ag.
CommandModes
Interfaceconguration
Syntax
ipdhcpclientbroadcast-flag
noipdhcpclientbroadcast-flag
Instruction
Thiscommandisusedforsettingthedhcpclientbroadcast-ag.
Aftersettingthiscommand,thepacketsentbydhcpclientincludes
broadcast-ag.Cancelthesettingwiththenocommand.
Theplatformversion4.8.22supportsthiscommand.
Itisonlyappliedto59seriesswitches.
Example
Thisexampleshowshowtoenablethedhcpclientmoduleonthe
interface.
ZXR10(config-if)#ipdhcpclientbroadcast-flag
ZXR10(config-if)#
ipdhcpclientclass-id
Purpose
Usethiscommandtosetclassidofdhcpclient.
CommandModes
Interfaceconguration
Syntax
ipdhcpclientclass-id{<string1>|hex<string2>}
noipdhcpclientclass-id
Syntax
Description
<string1>
classidinstringform,inlengthof1~128.
<string2>
classidinhexadecimalform,inlengthof
1~128.
Instruction
Thiscommandisusedforsettingtheclassidofdhcpclientexam-
ple.Theinformationofthisoptioncanbeinputbyhexadecimal
formorthestringform.
Theplatformversion4.8.22supportsthiscommand.
Itisonlyappliedto59seriesswitches.
Example
Thisexampleshowshowtosetclassidofdhcpclient.
CondentialandProprietaryInformationofZTECORPORATION79