Zte ZXR10 ZSR V2 - Page 122

ZXR10ZSRV2CongurationGuide(SystemManagement)
StepCommandFunction
ZXR10(config-flow-record)#collecttransport
{destination-port|icmp{ipv4|ipv6}{code|type}|
source-port|tcpflags}
Setstransportlayerinformation
asanon-keyeld.
ZXR10(config-flow-record)#collectip{cos|
protocol|version}
SetsIPinformationasanon-key
eld.
ZXR10(config-flow-record)#collectipv6
{[destinationaddress|address-prefixminimum
-mask<len>]|[sourceaddressaddress-prefix
minimum-mask<len>]|flow-label}
SetsIPv6informationasa
non-keyeld.Rangeoflen:
1–128.
3.CongureaNetFlowsamplingpolicy.
StepCommandFunction
1ZXR10(config)#sampler<sampler-name>Createsasamplerpolicy,
andnamesit.Upto200
differentsamplerpoliciescanbe
congured.
Rangeofthepolicyname:1–12
characters.
2ZXR10(config-sampler)#modedeterministic
1– –
–
out-of<rate>
Setsthesamplingmodeand
samplingrate.
deterministic:usesdeterministicsampling,thatis,ifthesamplingrateisN,thenone
packetoutofeveryNpacketsissampled.
<rate>:samplingrate,range:1–65535,default:1000.
4.CongureaNetFlowmonitoringpolicy.
StepCommandFunction
1ZXR10(config)#flowmonitor<monitor-name>Createsaowmonitorpolicy,
andnamesit.Upto60different
owmonitorpoliciescanbe
congured.
Rangeofthepolicyname:1–32
characters
2ZXR10(config-flow-monitor)#cache{entries
<num>|timeout{active|inactive}<seconds>}
Setscacheinformation.
12-6
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential