Zte ZXR10 ZSR V2 - Page 70

ZXR10ZSRV2CongurationGuide(SystemManagement)
CommandFunction
ZXR10(config)#loggingonEnablesthesystemlogfunction.
8.SetthelevelofthealarmmessagesenttotheTrapserver.
CommandFunction
ZXR10(config)#loggingTrap-enable<alarmlevel>Setsthelevelofthealarmmessage
senttotheTrapserver.
9.CongureotherSNMPparameters.
CommandFunction
ZXR10(config)#snmp-serverengine-id<engine-id>CongurestheSNMPlocal
engineID.Hexadecimalnumber,
range:1–24characters,default:
830900020300010289d64401.Asthe
corepartofanSNMPentity,theSNMP
enginesends,receivesandvalidates
SNMPmessages,extractsPacketData
Unit(PDU)assemblymessages,and
communicateswithSNMPapplication
programs.
ZXR10(config)#snmp-serverinput-limit<packets>SetstheSNMPpacketreceivingspeed.
Range:100–1000,default:200pps.
ZXR10(config)#snmp-serverpacketsize
<snmp-packet-max-size>
Conguresthemaximumlengthof
SNMPpackets.Unit:byte,range:
484–8192,default:8192.
ZXR10(config)#snmp-serverTrap-source<ip-address>ConguresthesourceIPaddressofall
Traps.
ZXR10(config)#snmp-serveraccess-list{ipv4|ipv6}<
acl-name>
UsesaconguredAccessControlList
(ACL)tocontrolthehoststhatcan
accessthesystemthroughSNMP .
10.CongureSNMPv3.
StepCommandFunction
1ZXR10(config)#snmp-servercontext
<context-name>
DenestheSNMPv3contextname.
Range:1–16characters.
6-4
SJ-20140504150128-007|2014-05-10(R1.0)ZTEProprietaryandCondential