Zte ZXR10 ZSR V2 - Page 77

Chapter6OSPFv3Conguration
CommandFunction
ZXR10(config-ospfv3-process-id)#distribute-list
{access-list<access-list-name>in|route-map<nameofa
route-map>in}
Thedistribute-listincommand
ltersroutesofwhichthe
ownerisOSPFroutes.The
distribute-listoutcommand
controlstheredistribution
ofexternalroutestoOSPF
areasafterType-5LSAsare
generated.Thisisasupplement
oftheredistributecommand.
ZXR10(config-ospfv3-process-id)#timersspf
<delay><holdtime>
Setstheintervalatwhichthe
OPSFv3protocolcomputes
routes.
ZXR10(config-ospfv3-process-id)#fast-reroute
<per-prefix>
SetstheOSPFv3FRR
parameter.
<spi-id>:securitypolicyindex,decimal,range:256to32767.
<Hex-string>:AMD5-keyis1–32characters,aSHAL-keyis1–40characters.
<rollover-interval>:thedelay(inminutes,rangeis0to100000)ofavalidkey.Asit
costsalongtimeforausertomodifythekeyontherouter,asmoothtransitionperiod
isneeded.Thisparameterisusedtosetthesmoothtransitionperiod.
hello-interval<seconds>:speciestheinterval(inseconds)atwhichHellopackets
aresentonthevirtuallink,range:1to8192,default:10.
dead-interval<seconds>:speciesthedeadinterval(inseconds)ofneighborsonthe
virtuallink,range:1to8192,default:40.
retransmit-interval<seconds>:speciestheretransmissionintervalofpacketsonthe
virtuallink,range:1to8192,default:5.
transmit-delay<seconds>:speciesthedelay(inseconds)afterwhichalinkstate
updatepacketistransmittedonthevirtuallink,range:1to8192,default:1.
<delay>:speciesthedelay(inseconds)ofroutere-computationthatfollowsafter
routeupdatesarereceived,range:0to65535,default:5.
<holdtime>:speciestheholdtime(inseconds),range:0to65535,default: 10.
3.CongureOSPFv3routesummarization,andredistributeroutesintoOSPFv3from
otherroutingprotocols.
CommandFunction
ZXR10(config-ospfv3-process-id)#redistribute
<protocol>[metric<metric-value>][metric-type
<type>][route-map<name>][tag<number>]
Redistributestheroutesof
protocolsintotheOSPFv3
protocol.
6-7
SJ-20140504150128-018|2014-05-10(R1.0)ZTEProprietaryandCondential