Zte ZXR10 - Port-Upsend

ZXR10CommandManual(SecurityVolume)
Related
Commands
showdebug
debugall
nodebugall
port-upsend
PurposeUsethiscommandtoenablethefunctionofdefendingtheDOS
attackandsetthecorrespondingparameters.
CommandModesInterfaceconguration
Syntaxport-upsend
port-upsend<packets><rcv_interval><close_interval>
noport-upsend
Syntax
Description
<packets>
Numberofreceivedpackets,whenthe
numberofreceivedpacketsislargerthanthe
<packets>valueduring<rcv_interval>,the
interfaceisdisabledfor<close_interval>
<rcv_interval>Timewhenpacketsarereceived,whenthe
numberofreceivedpacketsislargerthanthe
<packets>valueduring<rcv_interval>,the
interfaceisdisabledfor<close_interval>
<close_interval>
Closetime,whenthenumberofreceived
packetsislargerthanthe<packets>value
during<rcv_interval>,theinterfaceis
disabledfor<close_interval>
Instructions�Theport-upsendcommandisusedforthedefaultcongura-
tionofthefunctionofdefendingtheDOSattack,thedefault
conguredparametervalueis2025.
�port-upsend<packets><rcv_interval><close_interval>
isusedtoenablethefunctionofdefendingtheDOSat-
tackandsetparameters<packets>,<rcv_interval>and
<close_interval>.
�Thenoport-upsendcommandisusedtodisablethefunction
ofdefendingtheDOSattack.
�Theinterfacetypessupportedbythefunctionofdefendingthe
DOSattackareasfollows:
�Ethernetinterface,Ethernetsub-interface,QinQinterface,
smartgroupandsub-interface(notincludingsupervlan,bu-
cauesitdoesnotsupportcross-board).
�ATMinterface,ATMsub-interface.
�POSinterface,possub-interface,Mpppinterface.
�Inaddition,themethoddampingfordefendingtheDOSattack
needsnewadditionalrequirementstoaccomplishthefollowing
functions(CRDCR00213525).
164CondentialandProprietaryInformationofZTECORPORATION