Zte ZXR10 - Network Security Configuration; Arp Protect

Chapter3
NetworkSecurity
Configuration
TableofContents
arpprotect.......................................................................39
arpsource-ltered.............................................................40
arpto-static......................................................................40
ipverify...........................................................................41
showarparp-to-static........................................................41
showradius......................................................................42
showssh..........................................................................42
sshserverauthenticationispgroup.......................................43
sshserverauthenticationtype.............................................43
sshserverauthenticationmode...........................................44
sshserverenable..............................................................44
sshservergenerate-key.....................................................45
sshserveronly..................................................................45
sshserverversion.............................................................45
urpflog............................................................................46
arpprotect
PurposeUsethiscommandtoconguretheAddressResolutionProtocol
(ARP)protectionmodeandthethresholdbasedontheinterface,
MACaddress,whole.Cancelthesettingswiththenoformofthis
command.
CommandModesInterfacecongurationandglobalconguration
Syntaxarpprotect{interface|mac|whole}limit-num<number>
noarpprotect{interface|mac|whole}
Syntax
Description
interfaceARPprotectionmodebasedontheinterface
mac
ARPprotectionmodebaseontheMAC
address,supportedintheswitchprojectonly
wholeARPprotectionmodebasedonthewhole
limit-num<number>ARPprotectionthreshold,range:1~65535
DefaultsThereisnotanyARPprotectionmodeenabledbydefault.
CondentialandProprietaryInformationofZTECORPORATION39