Zte ZXR10 - Fig. 2.1-4 Physical Appearance of an Omni Antenna; Fig. 2.1-5 Physical Appearance of an Indoor (Outdoor) Directional Antenna; Table 2.1-3 Technical Indices of an Outdoor Omni Antenna

Chapter Error! Style not defined. Error! Style not defined.
2-5
Fig. 2.1-4 Physical Appearance of an Omni Antenna
Table 2.1-3 Technical Indices of an Outdoor Omni Antenna
Items Technical Indices
Frequency range 2.4 GHz ~ 2.5 GHz
Gain 8 dBi
VSWR 1.5: 1 Max
Polarization Vertical polarization
Horizontal beam width 360°
Vertical beam width 15°
Connector type N-K
Input impedance 50 Ω
Outer dimensions φ 22 mm × 800 mm
Installation mode
The antenna is fixed to a pole through a fixture, and connected to the
antenna interface in the AP through a cable.
2. Indoor (outdoor) directional antenna
Fig. 2.1-5 shows the physical appearance of an indoor (outdoor) directional
antenna, and Table 2.1-4 lists the technical indices.
Fig. 2.1-5 Physical Appearance of an Indoor (Outdoor) Directional Antenna