Zte ZXR10 - Page 66

ZXR10 WAS (V1.0) W140A Outdoor Wireless Access Point / Bridge
Professional Installation Instruction Manual
3-22
Parameter description:
Name Range Description
comstr 1~32 characters
Names of the SNMP access community strings
(up to 10). comstr is a string with up to 32
characters
{read-only|read-write} read-only, read-write
read-only: read-only access
read-write: Read-write access
4. snmp contact
Command mode: Configure mode
Function: Set the name and contact information of the equipment administrator
Command format: wlan (config) #snmp contact sysContact
Parameter description:
Name Range Description
sysContact 1~255 characters
A management variable of the system group in
MIB II, denotes the name and contact
information of the equipment administrator
5. snmp location
Command mode: Configure mode
Function: Configure the geographical location of the managed equipment
Command format: wlan (config) #snmp location sysLocation
Parameter description:
Name Range Description
sysLocation 1~255 characters
A management variable of the system group in
MIB, used to define the geographic location of
the managed equipment
6. snmp nodecode
Command mode: Configure mode
Function: Configure the network element (NE) codes of the managed equipment
Command format: wlan (config) #snmp nodecode node-code