Zte ZXV10 H100 - 3 Client Settings; 3.1 TCP;IP Installation

3-1
3 Client Settings
3.1 TCP/IP Installation
If your client PC is not installed with the TCP/IP protocol, please refer to the following
settings:
Click the <Start> button, select [Settings] and then click the [Network and Dial-up
Connections] icon;
Double click the [Local Connections] icon and then click the <Properties> button in
the [Local Connections] tab;
Click the <Install…> button and then double click the [Protocols] icon;
Select [Internet Protocol (TCP/IP)] and then click the <OK> button to finish the
protocol installation.