Zte ZXV10 W615 - Network Configuration; Broadband Connection Setup

Confidential and Proprietary Information of ZTE CORPORATION 11
C h a p t e r 4
Network Configuration
BroadbandConnectionConfiguration
Configuring a Broadband Connection (Fit AP)
The ZXV10 W615 has two operational modes: fat AP and fit AP. The default
operational mode is fit AP.
Context
For instructions on how to change the AP mode for the ZXV10 W615, refer to
“Setting the AP Mode”.
Notes:
After the AP mode is changed, the device restarts automatically.
Steps
1. Select Network > WAN > WAN Connection. The following page is
displayed.