ZXV10 W615 User Manual
12 Confidential and Proprietary Information of ZTE CORPORATION
2. Configure the parameters. Refer to the following table.
Parameter Description
IP Version Supported protocol versions include Internet Protocol
version 4 (IPv4), Internet Protocol version 6 (IPv6), and
IPv4/v6. The default setting is IPv4.
AC Discovery Mode Includes DHCP, Static, DNS, and Broadcast. The default
setting is DHCP.
AC Type Set AC Type. When AC Type is set to Adapter, the AP
selects the uplink AC automatically.
AC Name This parameter is configurable when AC Discovery Mode
is DHCP or DNS.
Enable CAPWAP
Encryption
Enables or disables CAPWAP encryption.
WAN Type When IP Version is IPv4, the supported modes are
DHCP, Static, and PPPoE. When IP version is IPv6 or
IPv4/v6, the supported modes are DHCP and PPPoE. The
default mode is DHCP. When AC Discovery Mode is
DHCP, the WAN mode is set to DHCP.
To Next Page
Loading...
