Zte ZXV10 W615 - Page 24

ZXV10 W615 User Manual
22 Confidential and Proprietary Information of ZTE CORPORATION
ii. Configure the parameters. Refer to the following table.
Parameter Description
Server Type Specifies the server type. The options are Master Auth
Server, Master Acct Server, Backup Auth Server, and
Backup Acct Server. The default is Master Auth Server.
Server IP Address Specifies the IP address of the authentication server, for
example, 192.168.1.1.
Server Port Specifies the port of the authentication server, for
example, 1812. The range is 0 to 65535.
Secret Specifies the WPA-EAP encryption key. The range is
1-64 characters.
Reauth Period The default is 3600 seconds.
Enable Preauth Enables or disables the pre-authentication function. The
function is disabled by default.
Enable WPA Group Key
Update
Enables or disables WPA group key updating function.
The function is enabled by default.
WPA Group Key Update
Interval
Specifies the interval of WPA group key update. The
default is 600 seconds.
WPA Encryption Algorithm Specifies the WPA encryption algorithm. Three options