ZXV10 W615 User Manual
28 Confidential and Proprietary Information of ZTE CORPORATION
Parameter Description
SSID Uplink Rate Limit The configuration range is 0-250000 kbps. The
default is 0, which means no rate limit.
STA Uplink Rate Limite The configuration range is 0-250000 kbps. The
default is 0, which means no rate limit.
3. Click Submit.
—END OF STEPS—
Setting Access Control List
The access control list is used to guarantee the device security in networks.
Steps
1. Select Network > WLAN > Access Control List. The following page is
displayed.
2. Configure the parameters. Refer to the following table.
Parameter Description
Choose SSID Specifies the SSID to be configured. The range is
SSID1-SSID32.
Mode
The supported modes are:
To Next Page
Loading...
