ZXV10 W615 User Manual
50 Confidential and Proprietary Information of ZTE CORPORATION
2. Configure the parameters. Refer to the following table.
Parameter Description
Enable Enables or disables the IP filter function.
Protocol The available options are ANY, TCP, User Datagram
Protocol (UDP), TCP AND UDP, and Internet Control
Message Protocol (ICMP). ANY refers to any protocol.
Name Refers to the IP filter name. The length is 1 to 256
characters.
Source IP Address Start IP address of the source (LAN side).
End Source IP Address End IP address of the source (LAN side).
Start Destination IP Start IP address of the destination.
To Next Page
Loading...
