Confidential and Proprietary Information of ZTE CORPORATION 4
C h a p t e r 2
Configuration Preparation
Login
The ZXV10 W615 supports configuration based on Web pages. You can
configure and manage the ZXV10 W615 through a Web browser.
Open the Internet Explorer, type http://192.168.0.228 on the address
bar, and then press Enter. The login dialog box is displayed, see the following
figure.
Enter a valid user name and a password, and then click Login. The Web
configuration page of the ZXV10 W615 device is displayed.
Notes:
The initial user name and password of a common user are both user. This
user has only the authority to view the related Status information of this
device. The initial user name and password of the administrator are both
admin. This user has the authority to configure and manage the device
through the Web browser.
For the factory defaults of ZXV10 W615, refer to the following table:
Item Default Value
IP Address/Mask of
Ethernet interface
IP address: 192.168.0.228
Subnet mask: 255.255.255.0
User name/Password
Initial user name/password for common user: user/user
Initial user name/password for administrator:
admin/admin
To Next Page
Loading...
