Zte ZXV10H108L - Page 10

ParameterNameDescription
EnableNAT
Enable/disableNetworkAddressTranslation(NAT).This
functioncanbeconfiguredinroutemodeonly.Itcannot
beconfiguredinbridgemode.
EnableVLAN
Enable/disableVLANconfiguration.VLANIDand802.1p
areusedtodefinetowhichVLANthedevicebelongs
aswellasthepriority.
VLANID
VLANIDofdatapacketsatWANinterface.Thevalue
rangesfrom1to4094.
802.1p
Dealswithpriority,suitableformultipleWANconnections
only.Thevaluerangesfrom0to7.Thedefaultvalueis
0,whichindicatesnopriorityset.Thegreaterthevalue
is,thehigherthepriorityis.
VPI/VCI
VPI/VCI(VirtualPath/ChannelIdentifier)identifiesvirtual
pathandvirtualchannelofalink.
Inthecaseoffirst-timeconfiguration,selectCreate,and
thenconfiguretheVPI/VCIvalues.Otherwise,selecta
previouslyusedVPI/VCIvaluesfromthedrop-downlist.
NewVPI/VCI
ConfiguresVPI/VCIvalues,whichrangefrom0to255
andfrom0to65535respectively.Bothofwhichare
providedbytheISP.
EncapsulationType
Theprotocolencryptiontype,whichsupportsLLCand
VCMUX.
ServiceType
ConfigurationofATMQoSwhichimposesrestrictionson
uplinktraffic.Fourtypesareavailable:CBR,RT-VBR,
nRT-VBRandUBR.
Username/Password
UsernameandpasswordforWANconnection
authentication.BothofwhichareprovidedbytheISP.
AuthenticationType
Authenticationprotocoltype.Options:Auto,PAPand
CHAP.ThevalueisAutobydefault.
ConnectionTrigger
Connectiontriggeringmode.Options:AlwaysOn,On
Demand,andmanual.ThemodeisAlwaysonbydefault.
IdleTimeout
Thedefaultvalueis1200seconds.Itcanbesetwhen
theConnectionTriggerissettoOnDemandonly.
3.ClickCreatetocreateconnection.
9