Zte ZXV10H108L - WLAN Configuration

4.2.2WLAN WLAN
WLAN
Configuration Configuration
Configuration
1.Select[Network→WLAN→Basic11n]toopentheWLANBasicParameterpage,as
showninthegurebelow.
2.Settheparametersaccordingtothedescriptionbelow.
ParameterNameDescription
EnableWirelessRFEnable/disableWLANRF.
EnableIsolationEnable/disableinternalisolation.
Mode
Wirelesscommunicationmode,including
Mixed(802.11b+802.11g)andMixed
802.11b+802.11g+802.11n.
Country/RegionCountryorregionwherethedevicetobeused.
BandWidth
Bandwidthtobeset.Options:20MHzand40MHz.
Thevalueis20MHzbydefault.Configurablewhen
Mixed(802.11b+802.11g+802.11n)isenabledonly.
Channel
Wirelesssignalchannel.Selectfromautoandinteg
ersfrom1to13accordingtothecountrycode.The
defaultvalueisAuto.
Wirelesschannelusedinthecommunicationbetween
thewirelessaccesspointandwirelessstation,which
channeltousedependsonthelocaladministration.
AllstationscommunicatingwithH108Lmustusethe
samechannel.
SGIEnable
Enable/disableSGI.Configurablewhen802.11n
modeisenabledonly.
BeaconIntervalThedefaultvalueis100ms.
10