Need help?Do you have a question about the Zumtobel LUXMATE CIRIA and is the answer not in the manual?
General| Brand | Zumtobel |
|---|---|
| Model | LUXMATE CIRIA |
| Category | Home Automation |
| Language | English |
Identifies the intended users for the manual, such as users and service personnel.
Details the organization of the manual, including sections, page numbers, and target audience.
Explains the various characters and symbols used throughout the manual for clarity.
Provides additional resources and contact information for further assistance.
Defines the proper and improper uses of the LM-CIRIA control unit and associated warnings.
Provides instructions on how to clean the product to maintain its quality.
Outlines the procedures for disposing of the device in accordance with regulations.
Confirms that the LM-CIRIA control unit complies with relevant EU Directives.
Lists the primary capabilities and features of the LM-CIRIA control unit.
Explains the various icons used on the LM-CIRIA control unit's touchscreen interface.
Details how to adjust the luminous flux of lamps, including brightening and dimming.
Explains the concept of colour temperature and its effect on light perception.
Describes the feature allowing dynamic adjustment of LED luminaire light color temperature.
Defines a scene as a set of predefined settings for lighting, blinds, etc.
Explains automation triggered by time, such as recalling scenes at specific times.
Describes automation that recalls scenes in a set sequence at specific times.
Explains automation triggered by daylight levels detected by a sky scanner.
Provides a general overview of the LM-CIRIA control unit's components and layout.
Details how to use the touchscreen for navigation and recalling scenes.
Explains the function of the touchring for adjusting settings and navigating.
Describes the function of the on/off key for recalling presence or absence scenes.
Explains how functions are displayed based on target groups for clarity.
Guides users on how to recall a scene by selecting the desired scene icon.
Explains how to adjust lighting brightness using scene icons and the touchring.
Details adjusting lighting brightness via building service icons and the touchring.
Provides instructions for operating blinds, including opening, closing, and positioning.
Explains how to fully open or close the blinds using the interface.
Details how to position blinds to a specific level using the touchring.
Explains how to fully open or close blind slats using the interface.
Details how to position blind slats to a specific angle using the touchring.
Guides on how to open, close, or stop the windows in a room.
Explains how to open, close, or stop curtains in a room.
Details how to move the screen upwards, downwards, or stop its movement.
Explains how to turn the ventilation system on or off.
Guides on how to increase or decrease the room temperature.
Explains how to switch entire luminaire groups on or off.
Details how to adjust the brightness of specific luminaire groups.
Explains how to adjust the colour temperature for luminaire groups.
Guides on how to fully open or close groups of blinds.
Details how to position groups of blinds to a specific level.
Provides steps to log into the LM-CIRIA control unit's service menu.
Explains how to change the display language of the control unit.
Describes how to view the current software version of the LM-CIRIA control unit.
Details how to assign room, group, and bus addresses to the control unit.
Explains how to configure the touchring's behavior, including wake-up reaction.
Details how to set the touchring's reaction when the unit is switched on.
Explains how to assign specific building service types to the touchring.
Details how to configure the volume level for the action click feedback.
Explains how to configure the behavior of the on/off key.
Details how to assign specific scenes to presence and absence states.
Explains how to set the fade speed for presence and absence scenes.
Details how to assign building service types to the on/off key.
Explains how to set the on/off key's reaction when the unit is switched on.
Details how to configure the behavior and illumination of the on/off key LED.
Explains how to set the LED's illumination conditions.
Details how to adjust the brightness intensity of the on/off key LED.
Explains how to lock or enable the scene saving function.
Explains how to adapt the entry level for direct access to functions.
Details how to create and display scene icons on the entry level.
Provides steps for manually adding new scene icons to the entry level.
Explains how to edit or change existing scene icons.
Details how to change the order of scene icons on the entry level.
Explains how to delete scene icons from the entry level.
Describes how to manually create building service icons.
Provides steps for manually adding new building service icons.
Explains how to edit or change existing building service icons.
Details how to change the order of building service icons.
Explains how to delete building service icons.
Describes how to manually create group icons.
Provides steps for manually adding new group icons.
Explains how to edit or change existing group icons.
Details how to change the order of group icons.
Explains how to delete group icons.
Describes how to create and manage bus address icons.
Provides steps for manually adding new bus address icons.
Explains how to edit or change existing bus address icons.
Details how to change the order of bus address icons.
Explains how to delete bus address icons.
Describes how to automatically create group and building service icons.
Provides steps to automatically recreate group and building service icons.
Explains how to expand the list of automatically created icons.
Details how to display or hide group numbers in the selection level.
Explains how to display or hide the footer in the entry level.
Explains how to display or hide the time in the entry level.
Explains how to display or hide the room temperature in the entry level.
Explains how to adapt touchscreen behavior and display settings.
Details how to adjust the brightness level of the touchscreen.
Explains how to configure the touchscreen screensaver behavior and wait time.
Details how to configure the volume level for action click feedback.
Explains how to configure touch delay and sensitivity for the touchscreen.
Provides steps to set or change the password for service menu access.
Explains how to set the timeout for returning to entry or selection levels.
Details the process for resetting the control unit to its factory default settings.
Describes how to address and re-group outputs and check their addresses.
Provides steps for assigning group, bus addresses, and type to outputs.
Explains how to check bus addresses and output status.
Details how to re-group outputs to existing or new group addresses.
Provides steps to assign building service types and scenes to inputs.
Explains how to delete room-wide, group, or bus addresses.
Details how to assign fade speeds to scenes, including all, presence, absence, or specific scenes.
Explains how to set the current time for the control unit.
Explains how to set the current date for the control unit.
Provides instructions on how to save scenes by selecting and holding icons.
Explains how to configure scenes for automatic recall based on time.
Provides steps to create time-based switch entries for scene recall.
Explains how to configure scene sequences for automated execution.
Provides steps to create scene sequences, including general settings and timing.
Describes the service menu levels for configuring the control unit.
Explains access to functions via the INTERNAL selection level.
Details settings for the control unit and entry level configuration.
Explains configuration of touchring, on/off key, and LED behavior.
Details touchscreen behavior and information display configuration.
Explains configuration of scene and building service icons.
Explains configuration of group icons.
Details functions for commissioning the field level.
Explains how to address outputs and inputs.
Explains how to delete room, group, and bus addresses.
Explains configuration of time entries for the LM-ZSM device.
Explains configuration of automated scene sequences for the LM-ZSQ device.
Lists available scene icons and their default names.
Lists available building service icons and their default names.
Describes common error messages and their possible causes and corrections.
Lists the default factory settings for various configuration parameters.
To Next Page