To Next PageTo Next Page
Need help?Do you have a question about the ZURN ZEMS6000AV and is the answer not in the manual?
General| Model | ZEMS6000AV |
|---|---|
| Category | Measuring Instruments |
| Power Supply | Battery |
| Pressure Rating | 150 psi |
| Sensor Type | Electromagnetic |
| Output | Pulse |
| Material | Brass |
| Temperature Range | 32°F (0°C) |
| Power Source | Battery |
| Operating Pressure | 15-150 PSI |
Details AC/DC power supply options for flushometers and converters.
Explains wiring connections between sensor, actuator, and power converter.
Instructions for locating and installing the sensor box in the wall.
Guide for mounting the automatic sensor into the electrical box.
Steps for fastening the top bracket to the electrical box.
Procedure for fitting and fastening the sensor cover plate.
Steps for installing and adjusting the control stop assembly.
Guide on attaching the flush valve to the control stop.
Instructions for drilling the mounting hole for the actuator.
Procedure for pulling the actuator cable through the wall.
Guide for installing the actuator escutcheon onto the actuator pipe.
Steps for securing cable and mounting the actuator.
Detailed steps for calibrating the sensor range for optimal performance.
Procedures to verify correct sensor calibration for closet installations.
Explanation of how the sensor activates the motor actuator.
Guidelines for cleaning and maintaining the flushometer and sensor.
Addresses problems like valve not operating or short flushing.
Covers issues like ghost flushing or insufficient water volume.
Solutions for noisy or splashing flush valve operations.
Diagram and list of key components for ZEMS G2 valves.
Detailed list of parts for ZEMS G2 valves, including repair kits.
Specific components for valve repair and control stop assemblies.
