WiFi: If you forget the WiFi password of the hand controller, you can long-press the tracking
and cancel buttons for 5 seconds while keeping the hand controller powered. When the
high-speed indicator flashes, the password will be reset to the default one: 12345678.
Cancel: One press to cancel GOTO or other functions.
Long press the cancel button for 3 seconds to go to zero position.
Equatorial/Azimuth Mode Switching: When the power for mount is off,
long press the cancel button to activate the mount again along with the
switch function. To enter Azimuth mode, do not loosen your finger from the
cancel button until the light indicator turns green. (How to identify the
current mode of the mount: It’s in Equatorial mode if the light indicator
displays red after boot; in Azimuth mode if the light indicator displays
green.)
Scan to watch
operating video
To Next Page
Loading...