Chapter 16 Dynamic DNS Setup
AMG1302-T10A User’s Guide
178
16.2 The Dynamic DNS Screen
Use this screen to change your Device’s DDNS. Click Advanced > Dynamic DNS. The screen
appears as shown.
Figure 99 Advanced > Dynamic DNS
The following table describes the fields in this screen.
Table 68 Advanced > Dynamic DNS
LABEL DESCRIPTION
Dynamic DNS Setup
Active Dynamic
DNS
Select this check box to use dynamic DNS.
Service Provider This is the name of your Dynamic DNS service provider.
Dynamic DNS
Type
Select the type of service that you are registered for from your Dynamic DNS service
provider.
Host Name Type the domain name assigned to your Device by your Dynamic DNS provider.
You can specify up to two host names in the field separated by a comma (",").
User Name Type your user name.
Password Type the password assigned to you.
Enable Wildcard
Option
Select the check box to enable DynDNS Wildcard.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
