AMG1302-T10A User’s Guide 203
CHAPTER 20
System Settings
20.1 Overview
This chapter shows you how to configure system related settings, such as system time, password,
name, the domain name and the inactivity timeout interval.
20.1.1 What You Can Do in the System Settings Screens
•Use the General screen (Section 20.2 on page 203) to configure system settings.
•Use the Time and Date screen (Section 20.3 on page 204) to set the system time.
20.2 The General Screen
Use this screen to configure system admin password.
Click Maintenance > System to open the General screen.
Figure 111 Maintenance > System > General
The following table describes the labels in this screen.
Table 77 Maintenance > System > General
LABEL DESCRIPTION
Password
Admin Password
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password
Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays a (*) for each character you type. After you change the password, use
the new password to access the Device.
To Next Page
Loading...
