Chapter 2 The Web Configurator
AMG1302-T10A User’s Guide
24
The icons provide the following functions.
2.2.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure Device features. The
following tables describe each menu item.
Table 2 Web Configurator Icons in the Title Bar
ICON DESCRIPTION
Wizards: Click this icon to go to the configuration wizards. See Chapter 5 on page
55 for more information.
Logout: Click this icon to log out of the web configurator.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Status This screen shows the Device’s general device and network status
information. Use this screen to access the statistics and client list.
Network
WAN Internet Access
Setup
Use this screen to configure ISP parameters, WAN IP address
assignment, and other advanced properties.
More
Connections
Use this screen to configure additional WAN connections.
LAN IP Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
DHCP Server Use this screen to configure LAN DHCP settings and DNS server.
Client List Use this screen to view current DHCP client information and to always
assign specific IP addresses to individual MAC addresses (and host
names).
IP Alias Use this screen to partition your LAN interface into subnets.
IPv6 Use this screen to configure the IPv6 settings on the Device’s LAN
interface.
Wireless LAN AP Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
More AP Use this screen to configure multiple BSSs on the Device.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WPS Station Use this screen to set up a WPS wireless network.
WDS Use this screen to set up Wireless Distribution System links to other
access points.
Scheduling Use this screen to configure the dates/times to enable or disable the
wireless LAN.
NAT General Use this screen to enable NAT.
Port Forwarding
Use this screen to make your local servers visible to the outside world.
ALG Use this screen to enable or disable SIP ALG.
Security
Firewall General Use this screen to set the default action that the firewall takes on
packets depending on packet direction.
Rules Use this screen to view the configured firewall rules and add, edit or
remove a firewall rule.
To Next Page
Loading...
