Chapter 6 WAN Setup
AMG1302-T10A User’s Guide
77
6.3.1 More Connections Edit
Use this screen to configure a connection. Click the edit icon in the More Connections screen to
display the following screen.
Figure 35 Network > WAN > More Connections: Edit
The following table describes the labels in this screen.
Table 20 Network > WAN > More Connections: Edit
LABEL DESCRIPTION
General
Active Select the check box to activate or clear the check box to deactivate this
connection.
Name Enter a unique, descriptive name of up to 13 ASCII characters for this
connection.
Mode Select Route from the drop-down list box if your ISP allows multiple computers
to share an Internet account.
If you select Bridge, the Device will forward any packet that it does not route to
this remote node; otherwise, the packets are discarded.
To Next Page
Loading...
