Chapter 7 LAN Setup
AMG1302-T10A User’s Guide
88
The following table describes the labels in this screen.
7.3 The DHCP Server Screen
Use this screen to configure the DNS server information that the Device sends to the DHCP client
devices on the LAN. Click Network > DHCP Server to open this screen.
Figure 40 Network > LAN > DHCP Server
Table 23 Network > LAN > IP: Advanced Setup
LABEL DESCRIPTION
RIP & Multicast Setup
RIP Direction Select the RIP direction from None, Both, In Only and Out Only.
RIP Version Select the RIP version from RIP-1, RIP-2B and RIP-2M.
IGMP Snoop Select Enabled to activate IGMP Snooping. This allows the Device to passively learn
memberships in multicast groups.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
