NetAtlas Enterprise Quick Start Guide
8
4 Click OK. After the device has been
found, the icon and label appear in
the network manager view window.
5 Right-click on the device icon to view
a set of SNMPc network manager
shortcuts. Click Properties to verify
the information you entered in the
previous step.
6 Make sure the PostgreSQL database
is running. PostgreSQL should start
automatically when you start
Windows. If it does not, click Start
(or start), Programs, PostgreSQL
8.0 and then click Start service.
8 Accessing the EMS
Follow the steps below to access the EMS.
1 In the SNMPc main screen, double-click
the device icon to view the Switch
Manager.
2 A screen displays. Click the Switch
Manager icon to access the main
EMS configuration screen.
9 Troubleshooting
1 SNMPc, EMS and/or PostgreSQL
will not install properly
• Make sure that the computer on which you want to install the
SNMPc, EMS and PostgreSQL meets the minimum hardware
and software requirements.
• To install PostgreSQL, make sure your computer is using NTFS
file system.
EMS_Switch_V1-02.fm Page 8 Wednesday, January 4, 2006 1:48 PM
To Next Page
Loading...
