ZyXEL Communications Dimension ES-3124 - Table 11-1 Bandwidth Control

Dimension ES-3124 Ethernet Switch
11-2 Bandwidth Control
The following table describes the labels in this screen.
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to enable bandwidth control.
Port This field displays the port number.
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Ingress Rate Type the maximum bandwidth allowed in megabits per second (Mbps) for traffic coming into this
port.
Egress Rate Type the maximum bandwidth allowed in megabits per second (Mbps) for traffic going out of this
port.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to reset the fields to your previous configuration.