Dimension GS-3012 Gigabit Ethernet Switch
11-2 Bandwidth Control
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
Ingress Rate Specify the maximum bandwidth allowed in megabits per second (Mbps) for the incoming traffic flow
on a port. Enter a number between 1 and 1000.
Egress Rate Specify the maximum bandwidth allowed in megabits per second (Mbps) for the out-going traffic flow
on a port. Enter a number between 1 and 1000.
Apply Click Apply to save the settings.
Cancel Click Cancel to reset the fields to your previous configuration.
To Next Page
Loading...
