ZyXEL Communications ES-2024 Series - Figure 85 MVR Configuration Example; Figure 86 MVR Configuration Example

Chapter 21 Multicast
ES-2024 Series User’s Guide
155
Figure 85 MVR Configuration Example
To configure the MVR settings on the Switch, create a multicast group in the MVR screen and
set the receiver and source ports.
Figure 86 MVR Configuration Example
To set the Switch to forward the multicast group traffic to the subscribers, configure multicast
group settings in the Group Configuration screen. The following figure shows an example
where two multicast groups (News and Movie) are configured for the multicast VLAN 200.